Maxim Integrated MAX9012ESA+, General Purpose Comparator, Dual, TTL Output, 9ns Propagation Delay, 4.5V to 5.5V Supply, 8-SOIC, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | General Purpose |
| Output type | TTL |
| Mounting | Surface Mount |
| Voltage - input offset | 3mV @ 5.5V |
| Voltage - supply, single (Dual (±)) | 4.5V ~ 5.5V |
| Output current | 40mA |
| Current - quiescent | 4.2mA |
| Current - input bias | 0.5µA @ 5V |
| Operating temperature | -40°C ~ 85°C |
| Package | Tube |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| CMRR, PSRR | 95dB CMRR, 82dB PSRR |
| Number of elements | 2 |
| Propagation delay | 9ns |
The Maxim Integrated MAX9012ESA+ is a dual, general-purpose comparator with TTL-compatible outputs in an 8-SOIC package. Its 9 ns propagation delay suits high-speed threshold detection and zero-crossing detectors.
ROHS3 compliance means no exemptions for lead in solder — verify your assembly's RoHS tolerance if you are still running legacy SnPb profiles.
No LTB risk on the horizon for this device.
The typical propagation delay is 9 ns, making it suitable for high-speed threshold detection and timing-critical signal paths.
The MAX9013ESA+ is the same dual comparator in the same 8-SOIC package but with complementary outputs (Q and Q-bar) instead of the single TTL output on the MAX9012ESA+. If your design needs a differential output pair, the MAX9013ESA+ is the direct alternative; otherwise the MAX9012ESA+ covers single-ended TTL logic.
Yes, it is ROHS3 compliant, meaning no RoHS exemptions apply. Suitable for RoHS-compliant assemblies.