Skip to main content
Log in
Analog Devices MAX8532EBTJ — Analog & Data Acquisition

MAX8532EBTJ LDO Regulator, 200 mA, 2.85 V Fixed, 6-UCSP

MPNMAX8532EBTJ
End of Life

Maxim Integrated MAX8532EBTJ, linear LDO regulator, 200 mA output, fixed 2.85 V, positive output, PSRR 62 dB at 100 Hz, dropout 0.2 V at 100 mA, quiescent current 150 µA, input up to 6.5 V, surface-mount 6-WFBGA/CSPBGA (6-UCSP), -40 to 85 °C.

$0.68Ref. price · indicative, final on quote
Analog Devices MAX8532EBTJ datasheet (PDF)
Packaging6-WFBGA, CSPBGA
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX8532EBTJ specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input6.5V
Voltage dropout0.2V @ 100mA
Voltage - output (Min (Fixed))2.85V
Output current200mA
Current - quiescent150 µA
Operating temperature-40°C ~ 85°C
PSRR62dB (100Hz)
PackageBulk
Case6-WFBGA, CSPBGA
Control featuresEnable
Protection featuresOver Current, Over Temperature, Short Circuit
Number of regulators1
Output configurationPositive

Product details

Fixed 2.85 V LDO for noise-sensitive rails

The Maxim Integrated MAX8532EBTJ is a single-output positive linear LDO regulator delivering a fixed 2.85 V at up to 200 mA. It is built for surface-mount assembly in a 6-WFBGA/CSPBGA package.

PSRR is listed at 62 dB at 100 Hz. Dropout is specified at 0.2 V maximum at 100 mA load.

Quiescent current and protection

Quiescent current is 150 µA typical, which keeps the regulator efficient in always-on or standby circuits. The part includes over-current, over-temperature, and short-circuit protection, so it can survive a faulted load without external crowbar circuitry. An Enable control pin lets you shut down the output for power sequencing or low-power sleep modes.

This part is RoHS non-compliant, so verify your assembly line's exemption allowance if you are in a RoHS-enforced jurisdiction.

Frequently asked questions

What is the PSRR of MAX8532EBTJ?

The PSRR is 62 dB at 100 Hz. That means it attenuates 100 Hz ripple on the input by about 1250:1, making it suitable for powering analog circuits from a rectified supply.

What compliance documentation does Maxim provide for MAX8532EBTJ?

The part is marked RoHS non-compliant. For REACH, UL, or IEC documentation, request the manufacturer's compliance declaration through the RFQ process.