Skip to main content
Log in
Analog Devices MAX707CSA+T — Power Management (PMIC / Gate Driver)

MAX707CSA+T Analog Devices Supervisor, 4.65V Threshold

MPNMAX707CSA+T
End of Life

Analog Devices MAX707CSA+T Simple Reset/Power-On Reset supervisor, 4.65V threshold, 140ms timeout, Active High/Active Low outputs, Push-Pull, 8-SOIC, Tape & Reel.

$6.23Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX707CSA+T specifications
ParameterValue
TypeSimple Reset/Power-On Reset
MountingSurface Mount
Voltage - threshold4.65V
Number of voltages monitored1
Operating temperature0°C ~ 70°C (TA)
ResetActive High/Active Low
OutputPush-Pull, Push-Pull
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout140ms Minimum
Case8-SOIC (0.154\", 3.90mm Width)

Product details

Threshold and timeout — what they mean for the rail

The MAX707CSA+T: That 140 ms window gives the supply time to settle and the oscillator to stabilise before the processor starts executing — a cold boot needs that delay to avoid running on a rail that has not fully come up.

Output options — both polarities on one die

Both an active-high and an active-low reset output are available from the same part, each push-pull. That means a single MAX707CSA+T can drive a microcontroller's /RESET pin (active low) and simultaneously signal a power-good flag to a GPIO or enable pin (active high) without an external inverter.

Active production and compliance

Analog Devices lists the MAX707CSA+T as Active with full RoHS3 compliance.

Frequently asked questions

What is the reset threshold and timeout for MAX707CSA+T?

The threshold is 4.65 V, and the reset timeout is 140 ms minimum. The part monitors a single voltage and holds the reset outputs low/high for that duration after the supply crosses the threshold.

Does MAX707CSA+T provide both active-high and active-low reset?

Yes, it has both an active-high and an active-low push-pull output. This lets it drive a processor /RESET pin and a power-good indicator from the same IC.