Analog Devices MAX706TEUA+T, Simple Reset/Power-On Reset supervisor, 1 channel, active-low reset, push-pull output, 3.08V threshold, 140ms minimum reset timeout, -40°C to 85°C, 8-uMAX/uSOP package.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 3.08V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Reset timeout | 140ms Minimum |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
The MAX706TEUA+T is a single-channel simple reset/power-on reset supervisor from Analog Devices. It monitors a single supply rail and asserts an active-low, push-pull reset output when the voltage drops below the 3.08 V threshold.
The primary difference is the reset threshold voltage. The MAX706TEUA+T monitors at 3.08 V (for 3.3 V rails), while the MAX706SEUA+T uses a different threshold — typically 2.93 V for 3.0 V rails. Both are single-channel simple reset supervisors with the same package and pinout. Choose the threshold that matches your supply rail.
The reset output is active-low, push-pull (totem pole). No external pull-up resistor is needed. The output drives high when the supply is above the threshold and pulls low during reset.
The reset timeout is a minimum of 140 ms. After the supply rises above the 3.08 V threshold, the reset output stays low for at least 140 ms before releasing, ensuring the processor has time to initialize.