Skip to main content
Analog Devices MAX706EPA — Discrete Semiconductors
Analog Devices

MAX706EPA Simple Reset/Power-On Reset IC, 4.4V Threshold

MPNMAX706EPA
End of Life

Analog Devices MAX706EPA Simple Reset/Power-On Reset IC, Active Low, Push-Pull Output, 4.4V Threshold, 140ms Minimum Reset Timeout, 8-PDIP, -40°C to 85°C.

$3.92Ref. price · indicative, final on quote
MAX706EPA datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX706EPA Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeThrough Hole
Voltage - threshold4.4V
Number of voltages monitored1
Operating temperature-40°C ~ 85°C (TA)
ResetActive Low
OutputPush-Pull, Totem Pole
PackageBulk
Reset timeout140ms Minimum
Case8-DIP (0.300\", 7.62mm)

Product details

What this supervisor does on your board

Housed in an 8-pin PDIP with through-hole mounting, this part fits legacy board designs, prototyping sockets, and environments where rework or manual assembly is preferred over SMT. The industrial temperature grade (-40°C to 85°C) suits factory automation, outdoor telecom cabinets, and engine-bay-adjacent electronics that see thermal cycling but not extended high heat.

Active lifecycle, no LTB risk

RoHS non-compliant, so verify your assembly house's solder process if you are mixing leaded and lead-free on the same board.

Frequently asked questions

What is the exact replacement for MAX706EPA?

The MAX706EPA is the active, current-production part. No replacement is needed. If you are looking for a second source, check the MAX706 series from Maxim (now Analog Devices) — the MAX706CPA and MAX706CSA share the same function but differ in package (DIP vs SOIC) and temperature grade.

Can MAX706EPA be used for a 3.3V system?

No. The reset threshold is 4.4V, which is too high for a 3.3V rail. The supervisor would never release reset in a 3.3V system. Use a supervisor with a threshold near 2.9V to 3.1V for 3.3V designs.

Does MAX706EPA include a watchdog timer?

No. The MAX706EPA is a simple reset/power-on reset supervisor with no watchdog timer. It monitors one voltage and generates a reset pulse on power-up or brown-out. For a combined watchdog and reset function, look at the MAX706 series variants that include the WDI pin.