Analog Devices MAX6474TA15BD2, LDO Voltage Regulator, 300 mA output, Fixed 1.5 V, Positive, 1.2 V to 5.5 V input, 8-WDFN Exposed Pad, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Adjustable (Fixed) |
| Mounting | Surface Mount |
| Voltage - input | 5.5V |
| Voltage - output | 5.5V |
| Voltage - output (Min (Fixed)) | 1.2V (1.5V) |
| Output current | 300mA |
| Current - quiescent | 136 µA |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Bulk |
| Case | 8-WDFN Exposed Pad |
| Control features | Enable, Manual Reset, Reset |
| Protection features | Over Current, Over Temperature, Reverse Polarity, Short Circuit |
| Number of regulators | 1 |
| Output configuration | Positive |
It accepts an input voltage up to 5.5 V.
Control features include Enable, Manual Reset, and Reset outputs, giving the system designer a clean power-good and manual restart without extra supervisor ICs. Protection covers over-current, over-temperature, reverse polarity, and short circuit — the set covers the common fault modes for a point-of-load regulator.
It comes in an 8-WDFN exposed pad package (3x3 mm body, supplier package 8-TDFN-EP). The exposed pad must be soldered to a PCB thermal land for proper heat dissipation.
The MAX6474 family includes multiple fixed-output voltage options in the same 8-WDFN package and pinout. For a different output voltage, select the variant with the desired fixed voltage (e.g., MAX6474TAxxBD2 where xx is the voltage code). No non-Maxim pin-compatible second source is listed in the available documentation.