Maxim Integrated MAX6315US26D3+T, Simple Reset/Power-On Reset, Active Low, Open Drain, 140ms Minimum Reset Timeout, 2.63V Threshold, -40°C to 125°C, SOT-143-4, Surface Mount.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 2.63V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Reset timeout | 140ms Minimum |
| Case | TO-253-4, TO-253AA |
The MAX6315US26D3+T: The reset output is active low and open drain, so it pulls low during a fault condition and requires an external pull-up resistor to the monitored rail or the logic supply.
The MAX6315US26D3+T is supplied in a SOT-143-4 package (TO-253-4 equivalent), a four-lead surface-mount package.
This makes it suitable for both new design-ins and ongoing production replenishment without the supply-chain risk of an obsolete part.
The reset output is active low — it pulls low when the monitored voltage drops below the 2.63V threshold, and releases (goes high-impedance due to the open-drain output) after the timeout period once the supply is above the threshold.
The MAX6315US26D3+T and MAX6315US26D2 share the same basic function and threshold voltage, but the suffix indicates different reset timeout options. The D3 suffix corresponds to a 140ms minimum timeout, while the D2 suffix has a different timeout. Verify the required timeout for your application before substituting.