Analog Devices
Analog Devices MAX626CSA+T low-side gate driver, N-Channel and P-Channel MOSFET, 2A peak output, 8-SOIC surface mount package, Tape & Reel.
MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T
| Parameter / Attribute | Specification / Value |
|---|---|
| Gate type | N-Channel, P-Channel MOSFET |
| Input type | Inverting |
| Channel type | Independent |
| Mounting | Surface Mount |
| Supply voltage | 4.5V ~ 18V |
| Logic voltage - VIL, VIH | 0.8V, 2.4V |
| Current - peak output (Source, sink) | 2A, 2A |
| Operating temperature | 0°C ~ 70°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of drivers | 2 |
| Driven configuration | Low-Side |
| Rise (Fall time) | 25ns, 20ns |
The MAX626CSA+T is a dual low-side MOSFET gate driver from Analog Devices, configured to drive both N-Channel and P-Channel MOSFETs with an inverting input logic.
The inverting input means a logic HIGH on the input pin turns the output LOW — check the polarity against your controller's output phase before committing the BOM line.
