Skip to main content
Log in
Analog Devices MAX6070BAUT41+T — Analog & Data Acquisition

MAX6070BAUT41+T Voltage Reference, 4.096 V ±0.08%, SOT-23-6

MPNMAX6070BAUT41+T
End of Life

Maxim Integrated MAX6070BAUT41+T, series voltage reference, fixed 4.096 V output, ±0.08% tolerance, 8 ppm/°C drift, 10 mA output, SOT-23-6, -40 to 125°C.

$2.93Ref. price · indicative, final on quote
PackagingSOT-23-6
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX6070BAUT41+T specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Reference typeSeries
Voltage - input4.3V ~ 5.5V
Voltage - output (Min (Fixed))4.096V
Output current10 mA
Current - supply350µA
Operating temperature-40°C ~ 125°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Tolerance±0.08%
CaseSOT-23-6
Noise - 0.1Hz to 10Hz9.6µVp-p
Noise - 10Hz to 10kHz9µVrms
Temperature coefficient8ppm/°C

Product details

Fixed 4.096 V reference in a SOT-23-6

The Maxim Integrated MAX6070BAUT41+T is a series voltage reference delivering a fixed 4.096 V output with ±0.08% initial tolerance. It operates from a 4.3 V to 5.5 V input rail and supplies up to 10 mA to the load.

Output drive and input headroom

The 10 mA output current rating covers a single high-resolution ADC reference input plus a small buffer or a few op-amp bias networks. If the load exceeds 10 mA, an external buffer is needed. The minimum input voltage of 4.3 V leaves headroom above the 4.096 V output.

Housed in a 6-pin SOT-23 package (SOT-6 supplier device package), surface-mount only. The small footprint suits dense mixed-signal boards.

Frequently asked questions

What is the tolerance of MAX6070BAUT41+T?

Initial tolerance is ±0.08%.

Is MAX6070BAUT41+T obsolete?

No — the product status is Active, with no end-of-life or last-time-buy notice in effect.

What is the typical accuracy of MAX6070BAUT41+T over temperature?

The temperature coefficient is 8 ppm/°C, which translates to roughly ±1.3 mV total drift across the -40°C to 125°C range, added to the initial ±0.08% tolerance.