Skip to main content
Analog Devices MAX6018AEUR12-T — Discrete Semiconductors
Analog Devices

MAX6018AEUR12-T Voltage Reference, ±0.2%, 1.263V Fixed

MPNMAX6018AEUR12-T
End of Life

Maxim MAX6018AEUR12-T, Series Voltage Reference, Fixed 1.263V Output, ±0.2% Tolerance, 6µA Supply Current, 45µVp-p Noise (0.1Hz–10Hz), SOT-23-3 Package, -40°C to 85°C.

$1.59Ref. price · indicative, final on quote
MAX6018AEUR12-T datasheet
PackagingTO-236-3, SC-59, SOT-23-3
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX6018AEUR12-T Technical Specifications
ParameterValue
Output typeFixed
Mounting typeSurface Mount
Reference typeSeries
Voltage - input1.8V ~ 5.5V
Voltage - output (Min (Fixed))1.263V
Current - output1 mA
Current - supply6µA
Operating temperature-40°C ~ 85°C (TA)
PackageBulk
Tolerance±0.2%
CaseTO-236-3, SC-59, SOT-23-3
Noise - 0.1Hz to 10Hz45µVp-p
Noise - 10Hz to 10kHz100µVrms
Temperature coefficient50ppm/°C

Product details

Supply range and output — rail planning

The input range from 1.8 V to 5.5 V lets this reference run off various rails, but the output is fixed at 1.263 V. The 1 mA maximum output current limits the load.

Package and mounting — board-level fit

The SOT-23-3 (TO-236-3 / SC-59) package is a three-pin surface-mount footprint common for small-signal transistors and references. The supplier device package is listed as SOT-23-3, and the mounting type is Surface Mount. No special pad layout beyond the standard SOT-23 land pattern; keep the trace short to the ADC reference pin to minimize noise pickup.

Lifecycle and sourcing

It can be specified into new BOMs without near-term obsolescence risk. Note that the part is marked RoHS non-compliant, which may affect its use in markets with RoHS enforcement — verify your exemption or accept the non-compliant status.

Frequently asked questions

What is the accuracy of MAX6018AEUR12-T?

Initial tolerance is ±0.2%, with a temperature coefficient of 50 ppm/°C over the -40°C to 85°C range.

Is MAX6018AEUR12-T RoHS compliant?

No, the part is marked RoHS non-compliant. Verify your local regulatory exemption before ordering.