Digital pot with a linear sweep — 32 taps, 200 kΩ end-to-end
End-to-end resistance is 200 kΩ. The memory type is volatile, meaning the wiper position defaults to mid-scale on power-up and must be set by the host controller after each reset. This is typical for digital pots used in trim/calibration loops where the micro reads a stored value from nonvolatile memory and writes it to the pot during initialization.
The 8-uMAX/uSOP package (3.00 mm width, 0.118" body) is a compact surface-mount footprint — useful where board area is tight, such as on a PLC analog I/O slice or a motor-drive feedback card. The typical temperature coefficient of 50 ppm/°C is the drift figure to watch when the pot sets a voltage reference or a current limit across temperature.