Analog Devices MAX491CSD+ RS422/RS485 transceiver, full duplex, 2.5Mbps data rate, 1/1 driver/receiver, 14-SOIC surface mount, 4.75V-5.25V supply, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Voltage | 4.75V ~ 5.25V |
| Protocol | RS422, RS485 |
| Operating temperature | 0°C ~ 70°C |
| Duplex | Full |
| Package | Tube |
| Data rate | 2.5Mbps |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 70 mV |
| Number of drivers (Receivers) | 1/1 |
The MAX491CSD+ is a single-channel RS422/RS485 transceiver from Analog Devices, supporting full-duplex communication at 2.5 Mbps over a single twisted pair or four-wire bus. The 70 mV receiver hysteresis provides noise immunity on long cable runs where ground potential differences can introduce several hundred millivolts of offset between nodes.
It is a full-duplex transceiver with a 2.5 Mbps data rate, supporting both RS422 and RS485 protocols.