Skip to main content
Log in
Analog Devices MAX4625EUT+T — Analog & Data Acquisition

MAX4625EUT+T SPDT Analog Switch, 1 Ohm On-Resistance

MPNMAX4625EUT+T
End of Life

Maxim Integrated MAX4625EUT+T, SPDT analog switch, 1 Ohm max on-resistance, 50 ns ton/toff, -57 dB crosstalk at 1 MHz, 1.8V to 5.5V supply, SOT-23-6, -40°C to 85°C.

$4.68Ref. price · indicative, final on quote
Analog Devices MAX4625EUT+T datasheet (PDF)
PackagingSOT-23-6
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4625EUT+T specifications
ParameterValue
MountingSurface Mount
Voltage - supply, single (V+)1.8V ~ 5.5V
Current - leakage (IS(off))2nA
Operating temperature-40°C ~ 85°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Crosstalk-57dB @ 1MHz
CaseSOT-23-6
Switch circuitSPDT
Charge injection65pC
Number of circuits1
On-State resistance1Ohm
Switch time (Ton, toff)50ns, 50ns
Multiplexer (Demultiplexer circuit)2:1
Channel capacitance (CS(off), CD(off))32pF
Channel-to-Channel matching (ΔRon)60mOhm

Product details

Switching times are 50 ns max for ton and toff. Crosstalk is -57 dB at 1 MHz. Charge injection is 65 pC, which means a small voltage glitch when the switch opens or closes. That matters if you're driving a high-impedance sample-and-hold or a precision integrator — the glitch can take microseconds to settle. For general-purpose muxing into an op-amp or ADC input, it's usually fine.

Package and temperature — fits the industrial panel

Housed in a 6-pin SOT-23 (SOT-6 supplier package), surface-mount only. The 2 nA max off-leakage means it won't load down your signal when the channel is deselected.

ROHS3 compliant.

Frequently asked questions

What is the on-resistance of the MAX4625EUT+T?

The maximum on-resistance is 1 Ohm. That's the worst-case figure across the full supply range and temperature; typical values are lower. Channel-to-channel matching is 60 mOhm max, so the two SPDT legs stay closely balanced.

What package does the MAX4625EUT+T come in?

It comes in a 6-pin SOT-23 package (SOT-6 supplier device package), surface-mount only. The ordering code suffix +T indicates Tape & Reel packaging; Cut Tape is also available.

What is the crosstalk of the MAX4625EUT+T?

Crosstalk is -57 dB at 1 MHz. That's the isolation between the two SPDT channels at that frequency — good enough for most audio and low-speed data muxing applications.