Rated for -40°C to 125°C, the MAX44246ASA+ fits industrial control cabinets, outdoor telecom enclosures, and automotive under-hood electronics. The 8-SOIC footprint is a standard layout for dual op-amps.
ROHS3 compliant.

Maxim Integrated MAX44246ASA+, dual general-purpose op-amp, 5 MHz gain bandwidth, rail-to-rail output, 2.7 V to 36 V supply, 8-SOIC package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1 µV |
| Voltage - supply span | 2.7 V |
| Current - supply | 420µA (x2 Channels) |
| Current - input bias | 300 pA |
| Current - output (Channel) | 40 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 5 MHz |
| Package | Tube |
| Slew rate | 3.8V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
Rated for -40°C to 125°C, the MAX44246ASA+ fits industrial control cabinets, outdoor telecom enclosures, and automotive under-hood electronics. The 8-SOIC footprint is a standard layout for dual op-amps.
ROHS3 compliant.
Within the same dual general-purpose op-amp class, parts like the OPA2192 or ADA4522-2 offer similar rail-to-rail output and low offset but differ in GBW and supply current. The MAX44246ASA+ sits at 5 MHz with 420 µA per channel — a balance of speed and power that a higher-GBW part like the OPA2192 (10 MHz, 1.1 mA) does not match. Pin compatibility depends on the exact compensation and shutdown pin assignments; verify the footprint against your layout before substituting.
The slew rate is 3.8 V/µs, which supports signal swings up to roughly 600 kHz at full output without slew-induced distortion — adequate for audio and low-frequency control loops.
It ships in an 8-SOIC package (0.154", 3.90 mm width) on Tube. The supplier device package is also 8-SOIC. Surface-mount only.