Analog Devices MAX4380EUT+T, single voltage-feedback op-amp, 210 MHz -3dB bandwidth, 485V/µs slew rate, rail-to-rail output, 4.5V to 11V supply, SOT-23-6, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 4.5 V |
| Current - supply | 7.5mA |
| Current - input bias | 8.5 µA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 210 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 485V/µs |
| Case | SOT-23-6 |
| Number of circuits | 1 |
The MAX4380EUT+T is a single voltage-feedback op-amp from Analog Devices (formerly Maxim Integrated) that delivers 210 MHz of -3dB bandwidth and a 485V/µs slew rate in a six-pin SOT-23 package. Typical applications include video line drivers, high-speed ADC buffers, and test equipment front-ends where the small footprint and wide bandwidth save board space without forcing a compromise on signal fidelity.
The 485V/µs slew rate and 7.5 mA supply current are specified in the datasheet.
No. The SOT-23-6 package does not include a shutdown or enable pin. The part is always active when powered.
The LMH6628 is a dual op-amp with similar bandwidth but higher supply current; the AD8055 is a single with comparable slew rate but a different pinout (SOIC-8). The MAX4380EUT+T wins on board area in a SOT-23-6 package and lower 7.5 mA supply current, but lacks the shutdown pin those parts sometimes offer.