Analog Devices MAX3075EESA+ half-duplex RS-485/RS-422 transceiver, 500 kbps data rate, 3V to 3.6V supply, 100 mV receiver hysteresis, -40°C to 85°C, 8-SOIC surface-mount package, ROHS3 compliant.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 3.6V |
| Protocol | RS422, RS485 |
| Operating temperature | -40°C ~ 85°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 500kbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 100 mV |
| Number of drivers (Receivers) | 1/1 |
The MAX3075EESA+ is a half-duplex transceiver in an 8-SOIC package, rated for 500 kbps on the bus.
At 500 kbps, this transceiver suits moderate-speed industrial links such as PLC-to-remote-I/O or sensor networks. The trade-off is cable reach: at 500 kbps you can run several hundred metres of twisted pair before signal degradation forces a repeater.
It's ROHS3 compliant.
The data rate is 500 kbps. This is the maximum bus signalling rate; actual throughput depends on protocol overhead and cable length.
No. The MAX3485 operates at 5V and supports up to 10 Mbps; the MAX3075EESA+ is a 3.3V part at 500 kbps. They are not pin-compatible for supply voltage or data rate, though both are half-duplex RS-485/RS-422 transceivers in 8-SOIC.
Yes, it is ROHS3 compliant.