Analog Devices MAX1916EZT+T, Linear LED Driver, 3 Outputs 60 mA, 2.5 V to 5.5 V Supply, Surface Mount TSOT-23-6, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Linear |
| Mounting | Surface Mount |
| Voltage | 5.5V |
| Current - output (Channel) | 60mA |
| I/O channels | 3 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Applications | Backlight |
| Case | SOT-23-6 Thin, TSOT-23-6 |
| Internal switch | Yes |
It integrates three constant-current outputs, each delivering up to 60 mA, with internal switches. Housed in a TSOT-23-6 package.
Surface-mount in a TSOT-23-6 (SOT-23-6 Thin) footprint. The supplier device package is TSOT-23-6.
The MAX1916EZT+T uses a standard TSOT-23-6 pinout. Pin 1 is the enable input (EN), pin 2 is the supply voltage (V+), pin 3 is the output for channel 3 (OUT3), pin 4 is ground (GND), pin 5 is output for channel 2 (OUT2), and pin 6 is output for channel 1 (OUT1). The datasheet provides the full pin diagram and recommended PCB layout.
Yes, the three independent outputs can drive the red, green, and blue channels of an RGB LED, each at up to 60 mA. Because the driver is linear, the forward voltage of each color must stay within the supply headroom. For a 5 V supply, red (≈2.0 V) and green/blue (≈3.0 V to 3.4 V) all fit; at 3.3 V, blue may drop below the regulation point if its forward voltage exceeds 3.0 V. Check the LED's Vf at the target current.