Maxim Integrated MAX1693EUB+T, USB Power Switch, P-Channel, High Side, 1 Output, 700mA, 60mOhm, 2.7V to 5.5V, 10-uMAX/uSOP, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Input type | Non-Inverting |
| Output type | P-Channel |
| Type | USB Switch |
| Mounting | Surface Mount |
| Voltage - load | 2.7V ~ 5.5V |
| Voltage - supply (Vcc (Vdd)) | Not Required |
| Output current | 700mA |
| I/O channels | 1 |
| Interface | On/Off |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Status Flag |
| Rds on | 60mOhm |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
| Fault protection | Current Limiting (Fixed), Over Temperature |
| Output configuration | High Side |
| Ratio - Input:Output | 1:1 |
The Maxim Integrated MAX1693EUB+T is a single-channel, high-side P-channel USB power switch in a 10-uMAX/uSOP package. It delivers up to 700 mA continuous output from a 2.7 V to 5.5 V load supply, with a typical Rds(on) of 60 mOhm. The switch integrates fixed current limiting and over-temperature fault protection, and provides a status flag output for fault reporting.
The typical on-resistance is 60 mOhm. This is the Rds(on) for the P-channel MOSFET at nominal conditions.
Yes. It provides fixed current limiting (the maximum output is 700 mA) and over-temperature protection. A status flag output indicates fault conditions.
Yes. The load voltage range is 2.7 V to 5.5 V, so it works on both 5 V and 3.3 V rails. No separate Vcc supply is needed.