Quad SPST switch with wide supply range and high bandwidth
It runs off a single supply from 10V to 70V or a dual supply from ±10V to ±35V, making it suitable for 24V industrial rails, 48V telecom buses, and bipolar signal chains in test equipment. The 10 ohm max on-resistance with 300 mOhm channel-to-channel matching keeps gain errors tight in multiplexed analog front-ends.
Bandwidth and signal integrity for analog paths
With a 145 MHz -3 dB bandwidth and -96 dB crosstalk at 10 MHz, this switch passes high-frequency analog signals without introducing noticeable bleed between channels. Charge injection of 580 pC is a consideration for sample-and-hold or integrator circuits where the switching transient lands on a hold capacitor. Off-leakage of 2.5 nA max and channel capacitance of 35 pF help preserve accuracy in high-impedance sensor multiplexing.
Housed in a 16-TSSOP (4.4 mm wide) package, surface-mount, supplied in tube. ROHS3 compliant.
Listed as Active with no last-time-buy notice.