Skip to main content
Log in
Analog Devices MAX14753EUE+ — Discrete Semiconductors

MAX14753EUE+ Analog Devices SP4T Analog Switch

MPNMAX14753EUE+
End of Life

Analog Devices MAX14753EUE+, SP4T analog switch, dual ±10V–36V or single 20V–72V supply, 130 ohm on-resistance, 20 MHz -3dB bandwidth, 16-TSSOP, -40°C to 85°C.

$8.74Ref. price · indicative, final on quote
Packaging16-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX14753EUE+ specifications
ParameterValue
MountingSurface Mount
Voltage - supply, dual (V±)±10V ~ 36V
Voltage - supply, single (V+)20V ~ 72V
Current - leakage (IS(off))20nA
Operating temperature-40°C ~ 85°C (TA)
-3db bandwidth20MHz
PackageTube
Crosstalk-62dB @ 100kHz
Case16-TSSOP (0.173\", 4.40mm Width)
Switch circuitSP4T
Charge injection200pC
Number of circuits2
On-State resistance130Ohm
Switch time (Ton, toff)25µs, 2µs
Multiplexer (Demultiplexer circuit)4:1
Channel capacitance (CS(off), CD(off))3.7pF
Channel-to-Channel matching (ΔRon)500mOhm

Product details

High-voltage SP4T mux for industrial analog signal routing

The MAX14753EUE+ is a dual 4:1 analog multiplexer (two SP4T switches) operating from a single 20 V to 72 V supply or dual ±10 V to ±36 V supplies. Maximum on-resistance is 130 ohms. Crosstalk is -62 dB at 100 kHz.

The single-supply range is 20 V to 72 V; dual-supply range is ±10 V to ±36 V. Maximum on-resistance is 130 ohms.

Housed in a 16-TSSOP (4.40 mm width) with surface-mount termination. The tube shipping format is typical for small-to-medium volume builds; if your pick-and-place line prefers tape-and-reel, confirm the alternate ordering option with your distributor.

The MAX14753EUE+ has an Active lifecycle status and ROHS3 compliance. No end-of-life notice is listed.

Frequently asked questions

Where can I buy MAX14753EUE+?

The MAX14753EUE+ is sourced through independent distribution channels. Submit an RFQ for current availability and pricing — stock and lead time are confirmed at quote time.

What is the on-resistance of MAX14753EUE+?

The maximum on-resistance is 130 ohms. That figure is per channel and is the key spec to check against your signal source impedance and ADC input load.

Is MAX14753EUE+ RoHS compliant?

Yes, it is ROHS3 compliant.

What is the crosstalk of MAX14753EUE+?

Crosstalk is specified at -62 dB at 100 kHz. That level of isolation is adequate for multiplexing 12- to 14-bit analog signals at moderate scan rates.