Skip to main content
Log in
Analog Devices MAX13223EEUP+T — Discrete Semiconductors

MAX13223EEUP+T RS232 Transceiver, 250kbps, 20-TSSOP

MPNMAX13223EEUP+T
End of Life

Analog Devices MAX13223EEUP+T RS232 transceiver, full duplex, 2/2 driver/receiver, 250kbps data rate, 3V to 5.5V supply, 20-TSSOP package, surface mount.

$8.67Ref. price · indicative, final on quote
Packaging20-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX13223EEUP+T specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Voltage3V ~ 5.5V
ProtocolRS232
Operating temperature-40°C ~ 85°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate250kbps
Case20-TSSOP (0.173\", 4.40mm Width)
Receiver hysteresis500 mV
Number of drivers (Receivers)2/2

Product details

RS232 transceiver for 3V to 5.5V rails

The MAX13223EEUP+T is a full-duplex RS232 transceiver from Analog Devices, integrating two drivers and two receivers in a single 20-TSSOP package. It handles data rates up to 250kbps, which covers the standard RS232 band for serial console, modem, and industrial controller links.

Receiver hysteresis and signal integrity

Receiver hysteresis is specified at 500 mV, which provides noise immunity on the RS232 bus. In a factory-floor cable run subject to motor-drive coupling, that margin keeps the receiver from toggling on induced transients below the threshold. Full-duplex operation means the two driver/receiver pairs can transmit and receive simultaneously, as required for a standard RS232 point-to-point link. The 250kbps data rate is sufficient for most legacy serial protocols including Modbus RTU at 115.2 kbaud with headroom.

The supplier device package is listed as 20-TSSOP, matching the package/case entry.

Frequently asked questions

Can MAX13223EEUP+T operate with a 3.3V supply?

Yes. The supply voltage range is 3V to 5.5V, so a 3.3V rail is within the operating window. The transceiver generates the RS232 voltage levels internally using a charge-pump architecture, so no external +/-12V supply is needed.

What is the data rate of MAX13223EEUP+T?

The data rate is 250kbps. This supports standard RS232 baud rates up to 115.2 kbaud with margin, and can handle 250 kbaud for higher-speed serial links.