Maxim Integrated MAX13050ASA+T CAN transceiver, full duplex, 1/1 driver/receiver, 1 Mbps, 4.75V-5.25V supply, 70 mV hysteresis, -40°C to 125°C, 8-SOIC package.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 4.75V ~ 5.25V |
| Protocol | CANbus |
| Operating temperature | -40°C ~ 125°C |
| Duplex | Full |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Data rate | 1Mbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 70 mV |
| Number of drivers (Receivers) | 1/1 |
It operates from a 4.75 V to 5.25 V supply and supports a data rate of 1 Mbps.
The 70 mV receiver hysteresis provides built-in noise rejection on the CAN bus lines, reducing false edge triggering in electrically noisy environments like motor drive bays or welding cells.
It remains a valid choice for new BOM entries.
The T suffix indicates Tape & Reel packaging. Electrically, the MAX13050ASA+T is the same die as the MAX13050ASA; the only difference is the shipping medium. It is a direct functional replacement.
No, the supply range is 4.75 V to 5.25 V. It is a 5 V device. Interfacing with a 3.3 V MCU requires level translation on the TXD/RXD lines.
No. The data rate is 1 Mbps, which is the maximum for classic CAN 2.0. CAN FD requires a transceiver rated for higher bit rates (typically 5 Mbps or more) and different timing characteristics.