Skip to main content
Log in
Analog Devices LTC4085EDE-3#TRPBF — Power Management (PMIC / Gate Driver)

LTC4085EDE-3#TRPBF Li-Ion Charger, 1.5A, 14-DFN

MPNLTC4085EDE-3#TRPBF
End of Life

Analog Devices PowerPath™ LTC4085EDE-3#TRPBF single-cell Li-Ion/Polymer battery charger, USB interface, 1.5A max charge current, 14-WFDFN exposed pad package, Bulk.

$2.81Ref. price · indicative, final on quote
Analog Devices LTC4085EDE-3#TRPBF datasheet (PDF)
Packaging14-WFDFN Exposed Pad
SeriesPowerPath™
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LTC4085EDE-3#TRPBF specifications
ParameterValue
SeriesPowerPath™
MountingSurface Mount
Battery pack voltage3.95V
Voltage5.5V
Current - chargingConstant - Programmable
Charge current - max1.5A
InterfaceUSB
Operating temperature-40°C ~ 85°C (TA)
PackageBulk
Case14-WFDFN Exposed Pad
Number of cells1
Battery chemistryLithium Ion/Polymer

Product details

Single-cell Li-Ion charger with PowerPath control

The LTC4085EDE-3#TRPBF is a single-cell Li-Ion/Polymer battery charger from the PowerPath series, integrating a USB-compatible input and PowerPath load-sharing control so the system runs from the USB bus when available and draws from the battery when it is not. Charge current is programmable up to 1.5 A max, and the termination voltage is set to 3.95 V for the battery pack — a slightly lower float than the common 4.2 V, which can extend cycle life at the cost of a small reduction in capacity per cycle.

Frequently asked questions

How does LTC4085EDE-3#TRPBF differ from LTC4085EDE-1#PBF?

The -3 variant terminates the battery at 3.95 V, while the -1 variant terminates at 4.1 V. Both are single-cell Li-Ion chargers in the same 14-DFN package with the same 1.5 A max charge current. The lower float voltage of the -3 trades a few percent of capacity for improved cycle life — a meaningful distinction if the product needs to survive 500+ charge cycles in a sealed enclosure.