Skip to main content
Log in
Analog Devices LTC1386CS#TRPBF — Sensors & Transducers

LTC1386CS#TRPBF RS562 Transceiver, 120kBd, 3V-3.6V, SOIC-16

MPNLTC1386CS#TRPBF
End of Life

Analog Devices LTC1386CS#TRPBF, RS562 full-duplex transceiver, 2/2 drivers/receivers, 120 kBd data rate, 3V–3.6V supply, 0°C–70°C, 16-SOIC (3.90mm width), Tape & Reel.

$9.33Ref. price · indicative, final on quote
Analog Devices LTC1386CS#TRPBF datasheet (PDF)
Packaging16-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LTC1386CS#TRPBF specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Voltage3V ~ 3.6V
ProtocolRS562
Operating temperature0°C ~ 70°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate120KBd
Case16-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis400 mV
Number of drivers (Receivers)2/2

Product details

RS562 transceiver for 3V serial links

Rated for 120 kBd data rate, it handles typical UART-based serial communication — terminal interfaces, modem links, or instrumentation ports — where the RS562 standard (a superset of RS232 with tighter voltage swing) is specified.

The 3V–3.6V supply range means this part runs from a single 3.3V rail, unlike older RS232 transceivers that need 5V or a charge-pump doubler. Receiver hysteresis is 400 mV, providing noise immunity on longer cable runs typical of RS562 links. That's comparable to the ADM202JRWZ-REEL (also 400 mV) but tighter than the ADM238LJRZ-REEL (650 mV).

For BOM planning, the 16-SOIC (0.154", 3.90mm width) package with supplier device package 16-SO is a standard footprint — no special land pattern or routing constraint beyond typical SOIC-16 guidelines.

Frequently asked questions

Is LTC1386CS#TRPBF equivalent to LTC1386CS (without the #TRPBF suffix)?

Yes — the LTC1386CS die and electrical specs are identical. The #TRPBF suffix indicates Tape & Reel packaging and ROHS3 compliance. The non-suffix variant typically comes in tube or bulk. Both share the same datasheet and performance.

Can LTC1386CS#TRPBF replace a MAX232?

Not directly — the MAX232 is an RS232 transceiver requiring a 5V supply and external charge-pump capacitors. The LTC1386CS runs on 3V–3.6V and follows the RS562 protocol, which uses a different voltage swing. Pinout and driver/receiver count (2/2) may match, but supply and protocol differences mean a board redesign is needed.