350 kHz GBW, 35 µV offset — the precision angle for the LT6012IGN#PBF
The LT6012IGN#PBF is a quad general-purpose op-amp from Analog Devices' LT® series, packing four independent amplifiers into a 16-SSOP package. Its 350 kHz gain-bandwidth product and 0.11 V/µs slew rate define the usable frequency range for signal conditioning — expect clean amplification up to roughly 35 kHz at full output swing before slew-rate limiting kicks in. Input offset voltage is trimmed to 35 µV typical, and input bias current sits at 20 pA. That combination makes this part a fit for precision DC circuits like thermocouple amplifiers, bridge sensor front-ends, or photodiode transimpedance stages where the error budget is tight.
Supply range and output swing — single-rail or split, it adapts
Supply span runs from 2.7 V minimum to 36 V maximum — that covers everything from a single lithium cell to ±15 V industrial rails. Each amplifier draws 135 µA of supply current (total for all four channels), so the full quad dissipates around 540 µA quiescent. Output can source or sink 20 mA per channel — enough to drive an ADC input, a reference buffer, or a small signal relay directly.
Active production, RoHS3 — no lifecycle surprises
RoHS3 compliance clears the regulatory gate for EU and most global markets without an exemption hunt. Sourced to order against your BOM quantity through independent distribution.