Analog Devices LT® series, LT6012ACS#PBF, quad general-purpose op-amp, 350 kHz gain bandwidth, 0.11 V/µs slew rate, rail-to-rail output, 14-SOIC package, surface mount, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Series | LT® |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 35 µV |
| Voltage - supply span | 2.7 V |
| Current - supply | 135µA (x4 Channels) |
| Current - input bias | 20 pA |
| Current - output (Channel) | 20 mA |
| Operating temperature | 0°C ~ 70°C |
| Gain bandwidth product | 350 kHz |
| Package | Tube |
| Slew rate | 0.11V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
The LT6012ACS#PBF: It delivers a gain bandwidth product of 350 kHz and a slew rate of 0.11 V/µs, with rail-to-rail output swing — suitable for low-frequency signal conditioning, sensor buffering, and multi-channel data acquisition where each channel draws 135 µA from the supply.
Each of the four channels can source or sink 20 mA, enough to drive an ADC input or a modest analog output load.
The ADA4096-2WARMZ-RL is a dual general-purpose op-amp with similar rail-to-rail output and 786 kHz GBW, but it is a dual (two channels) and rated for -40°C to 125°C. The AD706JNZ is a dual through-hole general-purpose op-amp with 800 kHz GBW and 30 µV offset, but it is through-hole and dual-channel. Neither is a direct pin-compatible replacement for the quad SOIC package.
The LT6012ACS#PBF is the surface-mount 14-SOIC variant of the LT6012 family. The base LT6012 part number typically refers to the same die in a different package (e.g., PDIP). Check the package type — the ACS suffix indicates 14-SOIC surface mount.