Skip to main content
Log in
Analog Devices LT1208CS8#PBF — Analog & Data Acquisition

LT1208CS8#PBF Dual General Purpose Op-Amp, 45 MHz, 400 V/µs

MPNLT1208CS8#PBF
End of Life

Analog Devices LT® series, LT1208CS8#PBF, dual general-purpose op-amp, 45 MHz gain-bandwidth, 400 V/µs slew rate, 7 mA supply per channel, 5 V to 30 V supply, 8-SOIC package, 0°C to 70°C.

$12.73Ref. price · indicative, final on quote
Analog Devices LT1208CS8#PBF datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesLT®
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LT1208CS8#PBF specifications
ParameterValue
SeriesLT®
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span30 V
Current - supply7mA (x2 Channels)
Current - input bias4 µA
Current - output (Channel)40 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product45 MHz
PackageTube
Slew rate400V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

What this dual op-amp brings to the board

The Analog Devices LT1208CS8#PBF is a dual-channel general-purpose op-amp. It delivers a 45 MHz gain-bandwidth product and a 400 V/µs slew rate.

400 V/µs slew rate — what it means for signal fidelity

The 400 V/µs slew rate supports full-power bandwidth into the low megahertz range without slew-induced distortion.

Analog Devices is still manufacturing it.

Package and footprint — 8-SOIC, surface mount

The part comes in an 8-SO package (0.154" body width, 3.90 mm) with a Tube shipping format. Surface-mount only.

Frequently asked questions

Where can I buy LT1208CS8#PBF and how do I get a price?

This part is sourced to order through independent distribution. Submit an RFQ for current availability and pricing — stock levels and per-unit cost are confirmed at quote time.

What is the pinout of LT1208CS8#PBF?

The pinout follows the standard 8-SOIC dual op-amp assignment: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is V–, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, pin 8 is V+.

What is the price of LT1208CS8#PBF?

Pricing is not listed publicly. Submit an RFQ for a current quote — the per-unit price depends on quantity and market conditions at time of order.

Can LT1208CS8#PBF replace LT1208CS8?

The LT1208CS8#PBF is the ROHS3-compliant version of the LT1208CS8. The electrical specs (45 MHz GBW, 400 V/µs slew rate, 7 mA per channel) are identical. The #PBF suffix indicates lead-free finishing. If your assembly process requires ROHS compliance, this is the direct replacement.