DS1855E-010+T&R

Analog Devices

Analog Devices DS1855E-010+T&R digital potentiometer, I²C, dual 10kΩ, 100/256 taps, Non-Volatile, Linear taper, ±20%, 14-TSSOP, -40°C to +85°C.

Analog Devices DS1855E-010+T&R
Download datasheet (PDF)
[ALLOC] Allocation Sourcing · Shortage Support
$4.80/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

DS1855E-010+T&R specifications
Parameter / AttributeSpecification / Value
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.7V ~ 5.5V
InterfaceI²C
Operating temperature-40°C ~ 85°C
TaperLinear
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSelectable Address
Tolerance±20%
ConfigurationPotentiometer
Number of taps100, 256
Case14-TSSOP (0.173\", 4.40mm Width)
Resistance10k
Number of circuits2
Temperature coefficient750ppm/°C
Resistance - wiper (Ohms)400

Technical details

Dual 10kΩ digital pot with I²C and non-volatile wiper storage

The DS1855E-010+T&R is a dual 10kΩ digital potentiometer from Analog Devices, configured as two independent potentiometers with a linear taper. It communicates over an I²C interface and stores wiper positions in non-volatile memory, so the setting persists after power cycling. Each potentiometer offers 256 tap positions in the variable-resistor mode and 100 taps in the potentiometer mode, giving 0.4% resolution on a 10kΩ end-to-end resistance. The wiper resistance is 400Ω typical, which defines the minimum output impedance.

Supply range and temperature grade for industrial designs

The temperature coefficient is 750 ppm/°C typical, which at 10kΩ full scale means roughly 7.5Ω drift per °C. For an open-loop trim setting this is fine; for a precision voltage divider, budget the drift against the system accuracy requirement.

14-TSSOP package and surface-mount integration

Housed in a 14-TSSOP (4.40mm width) package, the DS1855E-010+T&R mounts on the same footprint as standard logic and mixed-signal ICs. The supplier device package is 14-TSSOP, so the land pattern matches the Analog Devices recommended layout. The selectable address feature lets up to four devices share the same I²C bus without address conflicts.

DS1855E-010+T&R
[ALLOC] verified
Quote