DS1803Z-010+T&R

Analog Devices

Analog Devices DS1803Z-010+T&R dual digital potentiometer, 10kΩ, 256 taps, linear taper, I²C interface, 16-SOIC package, Tape & Reel.

Analog Devices DS1803Z-010+T&R
[ALLOC] Allocation Sourcing · Shortage Support
$12.89/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

DS1803Z-010+T&R specifications
Parameter / AttributeSpecification / Value
Memory typeVolatile
MountingSurface Mount
Supply voltage2.7V ~ 5.5V
InterfaceI²C
Operating temperature-40°C ~ 85°C
TaperLinear
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSelectable Address
Tolerance±20%
ConfigurationPotentiometer
Number of taps256
Case16-SOIC (0.154\", 3.90mm Width)
Resistance10k
Number of circuits2
Temperature coefficient750ppm/°C
Resistance - wiper (Ohms)400

Technical details

Dual 10kΩ digipot with 256-tap resolution

The DS1803Z-010+T&R is a dual-channel digital potentiometer from Analog Devices, each channel offering 10kΩ end-to-end resistance with 256 wiper tap positions. The linear taper means the resistance between the wiper and either terminal changes in equal steps per tap — no logarithmic scaling, so it suits voltage-divider and gain-setting applications rather than audio volume control. Communication runs over the I²C bus, and the selectable address feature lets up to eight of these devices share the same two-wire interface without collision.

Volatile memory and industrial temperature range

The wiper position is stored in volatile memory — the setting resets to midscale on power-up and is lost when the supply drops below the minimum operating voltage. For applications that must retain the calibration or trim setting through a power cycle, a non-volatile digipot or an external EEPROM companion is needed. The wiper resistance is 400Ω typical, and the temperature coefficient is 750ppm/°C — a 10kΩ setting drifts roughly 7.5Ω per degree, which matters in precision bias or reference applications but is acceptable for general-purpose adjustment. The tolerance is ±20%, so the absolute end-to-end resistance of a given unit can range from 8kΩ to 12kΩ. This is typical for digital potentiometers and is managed by calibrating the wiper setting in-system or by using the device in a ratiometric configuration where the absolute value cancels out.

16-SOIC footprint and supply posture

The Tape & Reel option suits automated pick-and-place assembly. Analog Devices lists this as an active product — no end-of-life notice, no last-time-buy window.

DS1803Z-010+T&R
[ALLOC] verified
Quote