The 4 A peak output is sized to charge the gate capacitance of medium-power IGBTs and MOSFETs in hard-switched bridges. With a typical rise/fall time of 12 ns and a maximum propagation delay of 54 ns, the part keeps dead-time margins tight enough for 100 kHz switching without shoot-through. The 50 kV/µs common-mode transient immunity ensures the drive signal stays valid during fast voltage transitions, which matters when switching 600 V or 1200 V rails.
Output supply range and isolation voltage
The output-side supply accepts 7.5 V to 18 V, covering the standard 15 V IGBT gate rail and 10 V to 12 V MOSFET rails without an intermediate regulator. The 3000 Vrms isolation rating supports reinforced insulation in 400 V bus systems, and the approvals from CSA, UR, and VDE simplify system-level certification for industrial and automotive power stages.
Package and footprint fit
The tube shipping medium is typical for prototype and low-volume builds; production quantities are also available on tape-and-reel.
Lifecycle and sourcing posture
ADI lists the ADUM3223WBRZ as an active product with ROHS3 compliance.