Skip to main content
Log in
Analog Devices ADM3051CRZ-REEL7 — Logic ICs

ADM3051CRZ-REEL7 CAN Transceiver, 1 Mbps, 8-SOIC, Active

MPNADM3051CRZ-REEL7
End of Life

Analog Devices ADM3051CRZ-REEL7, CANbus transceiver, half-duplex, 1 Mbps data rate, 4.5V to 5.5V supply, -40°C to 125°C, 8-SOIC package

$3.37Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ADM3051CRZ-REEL7 specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Supply voltage4.5V ~ 5.5V
ProtocolCANbus
Operating temperature-40°C ~ 125°C
DuplexHalf
PackageTape & Reel (TR); Cut Tape (CT)
Data rate1Mbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis150 mV
Number of drivers (Receivers)1/1

Product details

CAN bus transceiver for industrial node isolation

The ADM3051CRZ-REEL7 is a half-duplex CAN transceiver from Analog Devices, designed to interface a CAN protocol controller with the physical bus in industrial and automotive environments. It supports data rates up to 1 Mbps and operates from a single 4.5V to 5.5V supply. The receiver hysteresis of 150 mV provides noise immunity on the bus, reducing false edge triggering in electrically noisy factory-floor or vehicle networks.

Temperature grade and supply range for harsh environments

The 4.5V to 5.5V supply aligns with standard 5V CAN bus rails and allows tolerance for supply droop in long cable runs.

Analog Devices continues to manufacture this part with no announced end-of-life.

Package and footprint for 8-SOIC layout

The 1.27 mm pitch is layout-friendly for two-layer boards.

Frequently asked questions

What is the difference between ADM3051CRZ and ADM3051CRZ-REEL7?

The -REEL7 suffix denotes Tape & Reel packaging for automated assembly. The ADM3051CRZ base variant is typically supplied in tubes or trays. The silicon and electrical ratings are identical.

Does ADM3051CRZ-REEL7 support CAN FD?

No. The part is specified for standard CAN 2.0B at 1 Mbps. CAN FD requires a transceiver rated for higher data rates (typically 5 Mbps+). For CAN FD applications, consider a dedicated CAN FD transceiver such as the ADM3057E series.