Automotive video line driver with 10.5 MHz bandwidth
Its 10.5 MHz -3 dB bandwidth is matched to NTSC/PAL video baseband, rolling off cleanly above the passband to suppress out-of-band noise and DAC artifacts. The single-ended output drives a standard 75 Ω load directly, with 50 mA per channel of output current available.
Supply range and current budget for the 3.3 V automotive rail
Operating from a 2.6 V to 3.6 V single supply, this part sits comfortably on the common 3.3 V automotive rail. The 7.6 mA supply current is the total draw for the single channel — factor it into the module's power budget alongside the camera sensor and serializer. Dropout margin at 3.3 V nominal is 0.7 V above the minimum, which leaves headroom through cold-crank dips down to 3.0 V.
SOT-23-6 footprint for compact camera modules
Housed in a SOT-23-6 package (supplier device package same as case), the ADA4432-1BRJZ-R2 fits into the tight PCB real estate of an automotive camera module or head-unit board. Surface-mount assembly with standard reflow profiles; no exposed pad to route, which simplifies layout.
The ROHS3 rating covers the full substance restriction, including the four phthalates — no exemption paperwork needed for EU-market builds.