Skip to main content
Analog Devices ADA4098-1BUJZ-R5 — Discrete Semiconductors
Analog Devices

ADA4098-1BUJZ-R5 General Purpose Op-Amp, 1.05 MHz

MPNADA4098-1BUJZ-R5
End of Life

Analog Devices ADA4098-1BUJZ-R5, single general-purpose op-amp, 1.05 MHz gain bandwidth, 0.85 V/µs slew rate, rail-to-rail output, 3 V to 50 V supply, 195 µA supply current, TSOT-6 package.

$5.33Ref. price · indicative, final on quote
ADA4098-1BUJZ-R5 datasheet
PackagingSOT-23-6 Thin, TSOT-23-6
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

ADA4098-1BUJZ-R5 Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset15 µV
Voltage - supply span50 V
Current - supply195µA
Current - input bias350 pA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1.05 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.85V/µs
CaseSOT-23-6 Thin, TSOT-23-6
Number of circuits1

Product details

What this single op-amp brings to a BOM

The ADA4098-1BUJZ-R5 is a single-channel general-purpose op-amp. Its 3 V to 50 V supply span covers both low-voltage and industrial rails. The rail-to-rail output preserves dynamic range, and the 195 µA supply current suits loop-powered or battery-operated designs.

Key ratings and what they mean for the design

Gain bandwidth product of 1.05 MHz and slew rate of 0.85 V/µs are sufficient for audio-band filtering, sensor conditioning up to a few tens of kHz, and slow ADC drivers. The 15 µV typical input offset voltage eliminates the need for external trimming in most precision DC measurements — a real BOM simplification for weigh-scale or thermocouple inputs. Input bias current of 350 pA keeps errors negligible when driving from high-impedance sources like pH probes or photodiodes. Output current capability of 50 mA per channel lets the op-amp directly drive a modest load — a reference input, a small relay coil, or an LED indicator — without a separate buffer transistor.

Package and temperature grade

Housed in a TSOT-6 (SOT-23-6 Thin) surface-mount package, the ADA4098-1BUJZ-R5 fits dense PCB layouts. The -40°C to 125°C operating range qualifies it for automotive, industrial, and outdoor telecom enclosures.

Lifecycle and sourcing posture

ADI lists this part as Active with ROHS3 compliance. No end-of-life notice or last-time-buy window is in effect. Sourcing is through independent distribution; submit an RFQ for current availability and pricing.

Frequently asked questions

Is ADA4098-1BUJZ-R5 obsolete or EOL?

No, the part is listed as Active and ROHS3 compliant. No end-of-life notice has been issued, so it remains suitable for new designs.

Does ADA4098-1BUJZ-R5 have a rail-to-rail output?

Yes, the output type is rail-to-rail, which allows the output to swing close to both supply rails — important for single-supply ADC interfaces and low-voltage signal chains.

What is the equivalent of ADA4098-1BUJZ-R5?

There is no direct pin-compatible second source listed. The ADA4077-1ARZ-R7 is a single op-amp with similar offset (15 µV) and wider bandwidth (3.6 MHz), but it uses a different package (SOIC-8) and lacks rail-to-rail output. The AD8622ARZ-REEL is a dual op-amp with lower supply current (200 µA) and a 560 kHz GBW, also in a different package. Evaluate the specific footprint and feature requirements before substituting.

Where to buy ADA4098-1BUJZ-R5?

This part is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing; stock levels and lead time are confirmed at quote time.