Skip to main content
Analog Devices AD8655ARZ-REEL — Logic ICs
Analog Devices

AD8655ARZ-REEL Op-Amp, 28 MHz, 11 V/µs, Rail-to-Rail Output

MPNAD8655ARZ-REEL
End of Life

Analog Devices DigiTrim® AD8655ARZ-REEL, General Purpose Amplifier, 1 Circuit, Rail-to-Rail Output, 28 MHz GBW, 11 V/µs Slew Rate, 2.7 V to 5.5 V Supply, 8-SOIC Package, -40°C to 125°C.

$3.06Ref. price · indicative, final on quote
AD8655ARZ-REEL datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AD8655ARZ-REEL Technical Specifications
ParameterValue
SeriesDigiTrim®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset50 µV
Voltage - supply span5.5 V
Current - supply3.7mA
Current - input bias1 pA
Current - output (Channel)220 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product28 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate11V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

50 µV offset, 1 pA bias — precision without trimming

The AD8655ARZ-REEL: That combination means the part can handle DC-accurate measurements — thermocouple amplifiers, strain-gauge bridges, photodiode front-ends — without external nulling or frequent calibration. The low bias current also suits high-impedance sources.

220 mA output drive — more than a typical op-amp

Each channel can source or sink 220 mA. The 3.7 mA quiescent supply current is modest for the drive capability, so the part stays cool in a dense board layout.

8-SOIC package — standard footprint, tape-and-reel delivery

The narrow SOIC footprint is common across many op-amp families, so a layout swap to a different single-channel op-amp is usually a straight pad-for-pad replacement.

Frequently asked questions

What is the gain bandwidth product of AD8655ARZ-REEL?

The gain-bandwidth product is 28 MHz. That is the frequency at which the open-loop gain drops to unity, so it sets the usable bandwidth for a given closed-loop gain.

Is AD8655ARZ-REEL rail-to-rail output?

Yes, the output type is rail-to-rail. The input common-mode range is not rail-to-rail, but the output can swing within millivolts of both supply rails.

What is the equivalent of AD8655ARZ-REEL?

Within the same DigiTrim® family, the AD8605ACBZ-REEL7 is a single-channel op-amp with a lower 10 MHz GBW and 5 V/µs slew rate, but similar 80 µV offset and 0.2 pA bias. It is a lower-speed alternative for applications that do not need the full 28 MHz bandwidth. The AD8652 (dual-channel, 50 MHz GBW) is a faster, dual option in the same family.