Skip to main content
Analog Devices AD8030ARZ — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

AD8030ARZ Op-Amp, 125 MHz, 63 V/µs, Rail-to-Rail, 8-SOIC

MPNAD8030ARZ
End of Life

ADI AD8030ARZ, dual general-purpose op-amp, 125 MHz -3dB bandwidth, 63 V/µs slew rate, rail-to-rail output, 2.7 V to 12 V supply, 170 mA output, -40°C to 125°C, 8-SOIC tube.

$4.3Ref. price · indicative, final on quote
AD8030ARZ datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AD8030ARZ Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.6 mV
Voltage - supply span2.7 V
Current - supply1.4mA (x2 Channels)
Current - input bias700 nA
Current - output (Channel)170 mA
Operating temperature-40°C ~ 125°C
-3db bandwidth125 MHz
PackageTube
Slew rate63V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

The AD8030ARZ from Analog Devices is a dual-channel, general-purpose operational amplifier with 125 MHz -3dB bandwidth and 63 V/µs slew rate. The rail-to-rail output stage swings within millivolts of both supply rails. Each channel can source or sink 170 mA. Supply range spans 2.7 V to 12 V. The -40°C to 125°C temperature grade suits industrial motor drives, outdoor telecom enclosures, and under-hood automotive sensor interfaces.

Package and mounting

The AD8030ARZ comes in an 8-pin SOIC package (0.154″ body width, 3.90 mm), surface-mount, shipped in a tube. The SOIC-8 footprint is standard across thousands of dual op-amps, so the PCB layout is a drop-in for existing designs that use a dual op-amp in this package. No special pad geometry or thermal vias are needed unless the output is driving continuous 170 mA into a low-impedance load — in that case a few vias to a ground plane help pull heat out of the die.

Frequently asked questions

Is AD8030ARZ obsolete?

No, the AD8030ARZ is listed as Active by Analog Devices. No end-of-life notice is in effect, so it is suitable for new designs and production builds.

What is the slew rate of AD8030ARZ?

The AD8030ARZ has a slew rate of 63 V/µs, which allows it to reproduce a 5 V step in about 80 ns without distortion.

What is the equivalent of AD8030ARZ?

The AD8030ARJZ-REEL7 is the same die and electrical specification (125 MHz, 63 V/µs, rail-to-rail, 170 mA output) in tape-and-reel packaging. For a quad-channel option, the AD8040ARZ offers four amplifiers with identical per-channel specs in an SOIC-14 tube.

Can AD8030ARZ replace AD8030AR?

The AD8030ARZ is the ROHS3-compliant version of the AD8030AR. Electrically identical; the 'Z' suffix indicates lead-free / ROHS3 finish. It is a direct drop-in replacement.

What is the lead time for AD8030ARZ?

Lead time is confirmed at quote time and varies with market conditions. Request an RFQ for your target quantity to get a current lead-time estimate.