Skip to main content
Analog Devices AD712JNZ — Logic ICs
Analog Devices

AD712JNZ JFET Op-Amp, Dual, 4 MHz, 20 V/µs, 8-DIP

MPNAD712JNZ
End of Life

Analog Devices AD712JNZ, dual JFET-input operational amplifier, 4 MHz -3dB bandwidth, 20 V/µs slew rate, 25 pA input bias, 300 µV offset, 5 mA supply, 8-DIP through-hole package, 0°C to 70°C.

$8.48Ref. price · indicative, final on quote
AD712JNZ datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AD712JNZ Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeJ-FET
Voltage - input offset300 µV
Voltage - supply span36 V
Current - supply5mA
Current - input bias25 pA
Current - output (Channel)25 mA
Operating temperature0°C ~ 70°C
-3db bandwidth4 MHz
PackageTube
Slew rate20V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual JFET op-amp in a through-hole DIP

The AD712JNZ is a dual JFET-input operational amplifier from Analog Devices, packing two independent op-amps in a single 8-pin DIP package. The 4 MHz -3dB bandwidth and 20 V/µs slew rate give it enough speed for audio processing, active filters, and moderate-speed ADC drivers. Supply range spans 9 V to 36 V single or dual supply, drawing 5 mA per amplifier quiescent.

Package and board fit — through-hole only

The through-hole footprint suits socketed prototyping, breadboard work, or rework into legacy boards that already carry DIP footprints. No moisture sensitivity level concern for DIP — store the tubes dry, but no bake required before reflow (hand-solder or wave only). If your production board uses surface-mount, the sibling AD712JRZ in SOIC-8 is the same die in a smaller footprint.

Temperature grade — commercial only

Not rated for industrial or automotive under-hood use where ambient exceeds 70°C. If extended temperature is needed, the AD712KNZ (same specs, 0°C to 70°C as well) shares the same temperature grade; no industrial-temp sibling appears in this family.

Frequently asked questions

What is AD712JNZ's listed slew rate?

The AD712JNZ is specified with a 20 V/µs slew rate, which supports moderate-speed signal conditioning such as audio processing and ADC driving.

What package does AD712JNZ come in?

The AD712JNZ is supplied in an 8-DIP (0.300", 7.62 mm) through-hole package, also designated 8-PDIP. It ships in tubes.

Can AD712JNZ replace AD712?

Yes, the AD712JNZ is a direct functional replacement for the AD712 op-amp family. It shares the same dual JFET architecture, 4 MHz bandwidth, 20 V/µs slew rate, and 8-DIP footprint.

Is AD712JNZ suitable for audio applications?

Yes, with a 4 MHz bandwidth and 20 V/µs slew rate, the AD712JNZ is well suited for audio-frequency signal conditioning, active filters, and preamplifier stages in commercial-temperature equipment.