Skip to main content
Toshiba Semiconductor TLP385(BLL,E — Optoisolators

TLP385(BLL,E Optoisolator – 5000Vrms, DC Input

MPNTLP385(BLL,E
End of Life

Toshiba TLP385(BLL,E, single-channel transistor-output optoisolator, 5000Vrms isolation, DC input, 6-SOIC 4-lead package, 200%–400% CTR at 5 mA, -55°C to 110°C

$0.54Ref. price · indicative, final on quote
Packaging6-SOIC (0.173", 4.40mm Width), 4 Leads
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLP385(BLL,E Technical Specifications
ParameterValue
Input typeDC
Output typeTransistor
Mounting typeSurface Mount
Voltage - isolation5000Vrms
Voltage - output80V
Voltage - forward (Vf)1.25V
Current - output (Channel)50mA
Current transfer ratio400% @ 5mA
Current - DC forward (If)50 mA
Operating temperature-55°C ~ 110°C
PackageTube
Case6-SOIC (0.173\", 4.40mm Width), 4 Leads
Number of channels1
Vce saturation300mV
Rise (Fall time)2µs, 3µs
Turn on (Turn off time)3µs, 3µs

Product details

5000Vrms isolation in a 4-pin 6-SOIC

The TLP385(BLL,E is a single-channel transistor-output optocoupler from Toshiba, delivering 5000Vrms isolation in a 6-SOIC package with 4 leads. That isolation rating covers reinforced insulation requirements for industrial power supplies, motor drives, and PLC I/O modules where the primary and secondary sides need a solid safety barrier.

CTR range and switching speed

The current transfer ratio spans 200% to 400% at a 5 mA forward current. Typical rise and fall times are 2 µs and 3 µs, with turn-on and turn-off both at 3 µs.

Package and mounting

Supplied in a tube, the part is a surface-mount 6-SOIC with a 0.173-inch body width and 4.40 mm height — the 4-lead variant leaves two pins unpopulated. The 80 V output rating and 50 mA continuous output current cover most signal-level isolation needs.

Frequently asked questions

What is the current transfer ratio (CTR) range for TLP385(BLL,E?

The CTR is specified at 200% minimum and 400% maximum, both measured at a forward current of 5 mA. This range gives you a guaranteed drive capability of 10–20 mA on the output side from a 5 mA input.