Skip to main content
Toshiba Semiconductor TLP292-4(LGBTR,E — Optoisolators

TLP292-4(LGBTR,E – Toshiba 4-ch AC/DC Optoisolator 3750Vrms

MPNTLP292-4(LGBTR,E
End of Life

Toshiba TLP292-4(LGBTR,E quad-channel transistor optocoupler, 3750Vrms isolation, 100%–600% CTR at 500µA, -55°C to 125°C, 16-SOIC surface mount

$1.76Ref. price · indicative, final on quote
Packaging16-SOIC (0.179", 4.55mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLP292-4(LGBTR,E Technical Specifications
ParameterValue
Input typeAC, DC
Output typeTransistor
Mounting typeSurface Mount
Voltage - isolation3750Vrms
Voltage - output80V
Voltage - forward (Vf)1.25V
Current - output (Channel)50mA
Current transfer ratio600% @ 500µA
Current - DC forward (If)50 mA
Operating temperature-55°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Case16-SOIC (0.179\", 4.55mm Width)
Number of channels4
Vce saturation300mV
Rise (Fall time)2µs, 3µs
Turn on (Turn off time)3µs, 3µs

Product details

3750Vrms quad-channel transistor optocoupler

Toshiba TLP292-4(LGBTR,E is a four-channel transistor-output optocoupler with AC/DC input capability, packaged in a 16-pin SOIC (0.179" body width). The 3750Vrms isolation rating meets basic safety isolation for industrial control interfaces, PLC digital inputs, and motor-drive feedback paths. Each channel can sink up to 50 mA at 80 V output, with typical rise/fall times of 2 µs and 3 µs respectively — fast enough for 100 kHz switching signals or 24 V logic-level communication.

CTR range 100% to 600% at 500 µA forward current

The current transfer ratio spans 100% minimum to 600% maximum, measured at If=500 µA. That wide spread means the LED drive current can be as low as 1.6 mA to guarantee a saturated output at 25°C (assuming CTR=100% at Vce=5V), but the upper end gives headroom for degraded LED output over temperature and lifetime. The Vce saturation voltage is 300 mV max, so the output pulls close to ground when on. AC input compatibility means the LED pair is back-to-back: the optocoupler conducts on both half-cycles of an AC waveform, eliminating the need for an external bridge rectifier when sensing line voltage or AC presence.

Active production, full military temp range

Toshiba lists the TLP292-4(LGBTR,E as Active and RoHS compliant. The SO-16 package is compatible with standard reflow profiles (MSL level not stated in evidence, but typical for Toshiba SOICs is MSL1). Sourced per RFQ — no stock-holding claim. The part is available in Tape & Reel (TR) or Cut Tape (CT) options for prototype or production quantities. Confirm BOM quantity and preferred packaging when requesting a quote.

Peer variants: tape-and-reel suffix differences

The TLP292-4 family includes several reel suffixes (LA-TP, V4LATPE, V4-TP) with identical electrical ratings — same 3750Vrms isolation, same CTR range, same 300mV Vce sat, same 2µs/3µs rise/fall times. The (LGBTR,E suffix is the standard 13-inch reel option; the (LA-TP,E and (V4-TP,E are alternative reel formats. All are active and functionally interchangeable on the PCB.

Frequently asked questions

Is TLP292-4(LGBTR,E compatible with AC input?

Yes, the input accepts both AC and DC. The back-to-back LED structure allows conduction on both half-cycles of an AC waveform, eliminating the need for an external bridge rectifier in line-voltage sensing applications.

What is the current transfer ratio (CTR) range of TLP292-4(LGBTR,E)?

The wide range gives design flexibility: a low CTR corner requires higher LED drive current, while a high CTR corner provides margin for LED degradation over life.