Skip to main content
Toshiba Semiconductor TLP2710(TP,E — Optoisolators
Toshiba Semiconductor

TLP2710(TP,E Toshiba Optocoupler 5MBd 5000Vrms 6-SOIC

MPNTLP2710(TP,E
End of Life

Toshiba TLP2710(TP,E, single-channel high-speed logic output optocoupler, 5MBd data rate, 5000Vrms isolation, push-pull totem-pole output, 6-SOIC package, -40°C to 125°C.

$1.57Ref. price · indicative, final on quote
TLP2710(TP,E datasheet
Packaging6-SOIC (0.295", 7.50mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLP2710(TP,E Technical Specifications
ParameterValue
Input typeDC
Output typePush-Pull, Totem Pole
Mounting typeSurface Mount
Voltage2.7V ~ 5.5V
Voltage - isolation5000Vrms
Voltage - forward (Vf)1.9V (Max)
Current - output (Channel)10 mA
Current - DC forward (If)8mA
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Data rate5MBd
Case6-SOIC (0.295\", 7.50mm Width)
Number of channels1
Inputs - side 1/Side 21/0
Rise (Fall time)11ns, 13ns
Propagation delay tpLH (tpHL)250ns, 250ns
Common mode transient immunity25kV/µs

Product details

5MBd logic output with 5000Vrms isolation

The TLP2710(TP,E is a single-channel, high-speed optocoupler from Toshiba delivering a 5MBd data rate with a push-pull totem-pole output. The 5000Vrms isolation rating meets reinforced insulation requirements for motor drives, industrial PSUs, and PLC I/O modules where galvanic separation between the controller and high-voltage side is non-negotiable.

25kV/µs CMTI keeps the output clean in noisy switching

Common-mode transient immunity of 25kV/µs minimum means this part holds its logic state when the ground plane jumps during IGBT or SiC FET switching — a spec that separates a reliable gate-drive interface from one that glitches. The 250ns max propagation delay in both directions keeps the timing budget tight for PWM loops running above 50 kHz.

Active production with wide supply and temp range

Supply voltage spans 2.7V to 5.5V, which covers 3.3V and 5V logic rails without a separate regulator. ROHS3 compliant.

6-SOIC package and tape-reel delivery

Housed in a 6-SOIC package with 7.50mm body width, surface-mount. Supplied on Tape & Reel (TR) or Cut Tape (CT). The 8mA max forward current and 10mA output per channel keep the thermal load low — no heatsink needed. Store the reels dry;.

Frequently asked questions

Is TLP2710(TP,E compatible with a 5V supply?

Yes. The supply voltage range is 2.7V to 5.5V, so 5V logic rails are within spec. The push-pull output swings rail-to-rail, which means no pull-up resistor is needed on the output side.

What is the closest functional second-source for TLP2710(TP,E?

The TLP2710(TP4,E is the same die in an alternate tape-and-reel suffix — identical 5MBd data rate, 5000Vrms isolation, and package. The TLP2310(TPL,E is a 3750Vrms variant in the same 6-SOIC footprint, useful if your isolation requirement is lower and you want a cost-optimized drop-in.

Is TLP2710(TP,E RoHS compliant?

Yes, it is ROHS3 compliant. No exemption-based conflicts for lead-free assembly.