Skip to main content
Toshiba Semiconductor TLP2710(TP4,E — Optoisolators
Toshiba Semiconductor

TLP2710(TP4,E Optocoupler, 5MBd, 5000Vrms Isolation, 6-SOIC

MPNTLP2710(TP4,E
End of Life

Toshiba TLP2710(TP4,E high-speed logic output optocoupler, 5MBd data rate, 5000Vrms isolation, push-pull totem-pole output, 2.7V to 5.5V supply, -40°C to 125°C, 6-SOIC package.

$1.57Ref. price · indicative, final on quote
TLP2710(TP4,E datasheet
Packaging6-SOIC (0.295", 7.50mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLP2710(TP4,E Technical Specifications
ParameterValue
Input typeDC
Output typePush-Pull, Totem Pole
Mounting typeSurface Mount
Voltage2.7V ~ 5.5V
Voltage - isolation5000Vrms
Voltage - forward (Vf)1.9V (Max)
Current - output (Channel)10 mA
Current - DC forward (If)8mA
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Data rate5MBd
Case6-SOIC (0.295\", 7.50mm Width)
Number of channels1
Inputs - side 1/Side 21/0
Rise (Fall time)11ns, 13ns
Propagation delay tpLH (tpHL)250ns, 250ns
Common mode transient immunity25kV/µs

Product details

High-speed digital isolator for industrial and automotive signal paths

The Toshiba TLP2710(TP4,E is a single-channel, high-speed logic-output optocoupler rated for 5MBd data rate and 5000Vrms isolation voltage. Propagation delay is 250ns max, and common-mode transient immunity is 25kV/µs minimum, which keeps the output clean during fast switching events on the high-voltage side.

The 5000Vrms isolation rating qualifies this optocoupler for reinforced insulation in mains-connected equipment, such as industrial drives and grid-tied power supplies. The 25kV/µs common-mode transient immunity (CMTI) is the spec that matters when the isolation barrier sees fast voltage slew from a switching power stage or an IGBT bridge. With 11ns rise and 13ns fall times, the output edges stay clean enough for 5MBd signalling without extra schmitt-trigger buffering on the receiving side.

Temperature range and supply compatibility

The 2.7V to 5.5V supply range means it can be powered from a 3.3V rail in a modern MCU interface or from a 5V rail in legacy PLC backplanes. The forward diode requires 1.9V typical and 8mA max input current, which is within the drive capability of most 3.3V CMOS outputs.

Package and mounting

Supplied in a 6-SOIC wide-body package (7.50mm body width) with a 6-SO supplier device code. Surface-mount only. The wide creepage distance supports the 5000Vrms rating.

Frequently asked questions

What is the data rate of TLP2710?

The TLP2710(TP4,E is rated for 5MBd data rate, with a maximum propagation delay of 250ns in both directions.

Is TLP2710(TP4,E compatible with 3.3V?

Yes, the supply range is 2.7V to 5.5V, so it works directly on a 3.3V rail. The input forward voltage is 1.9V typical, well within 3.3V CMOS drive capability.

When sourcing TLP2710(TP4,E, what's the closest functional second-source — TLP2310(TPL,E?

The TLP2310(TPL,E is a close functional peer with the same 5MBd data rate, push-pull output, and 250ns propagation delay, but its isolation voltage is 3750Vrms versus the TLP2710's 5000Vrms. If your barrier requires 5000Vrms, the TLP2710 is the correct fit; for 3750Vrms applications the TLP2310 is a pin-compatible alternative.