Skip to main content
Toshiba Semiconductor TLP183(GRL,E — Optoisolators

TLP183(GRL,E Optocoupler, 3750Vrms Isolation, 6-SOP

MPNTLP183(GRL,E
End of Life

Toshiba TLP183(GRL,E single-channel transistor-output optocoupler, DC input, 3750Vrms isolation, 100% to 200% CTR at 5mA, 6-SOP surface-mount package, -55°C to 125°C operating range, active lifecycle.

$0.5Ref. price · indicative, final on quote
Packaging6-SOIC (0.173", 4.40mm Width), 4 Leads
RoHSRoHS Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLP183(GRL,E specifications
ParameterValue
Input typeDC
Output typeTransistor
MountingSurface Mount
Voltage - isolation3750Vrms
Voltage - output80V
Voltage - forward (Vf)1.25V
Current - output (Channel)50mA
Current transfer ratio200% @ 5mA
Current - DC forward (If)50 mA
Operating temperature-55°C ~ 125°C
PackageTube
Case6-SOIC (0.173\", 4.40mm Width), 4 Leads
Channels1
Vce saturation300mV
Rise (Fall time)2µs, 3µs
Turn on (Turn off time)3µs, 3µs

Product details

3750Vrms isolation in a compact 6-SOP package

The Toshiba TLP183(GRL,E is a single-channel transistor-output optocoupler with 3750Vrms isolation in a 6-SOP package (4.40mm width). The DC input and transistor output provide a CTR range of 100% to 200% at 5mA forward current.

The 100% to 200% CTR at 5mA means the output transistor can sink at least as much current as the LED drives, with headroom for degradation over the product life. At 5mA input, the output can saturate to 300mV max (Vce(sat)), keeping logic-level interfaces clean. Rise and fall times are 2µs and 3µs typical, with turn-on/off times of 3µs each — fast enough for 100 kHz switching supplies or low-speed serial isolation, but not for high-speed data links. The 50mA output current rating and 80V output voltage allow direct drive of small relays, solid-state relays, or PLC input modules without a buffer transistor.

The wide range also covers military/aerospace ground-support equipment, though the part lacks formal MIL-screening.

Listed as Active with RoHS compliance. For new designs, the active status means no immediate supply-risk flag.

Frequently asked questions

What is the current transfer ratio (CTR) of TLP183(GRL,E?

The CTR range is 100% minimum to 200% maximum, specified at 5mA forward current. This wide spread ensures the optocoupler can drive the output load even as the LED efficiency degrades over temperature or time.

What is the equivalent replacement for TLP183(GRL,E?

The TLP183(GRH-TPL,E is a functional equivalent with the same isolation, CTR range, and switching speed, but shipped in Tape & Reel packaging instead of Tube. For a second-source option with a slightly narrower temperature range (-55°C to 110°C), the TLP185(GB,SE or TLP185(GR,SE can be considered — verify pin compatibility and CTR bin before substituting.