Skip to main content
Taiyo Yuden LBC2518T3R3M — Inductors & Chokes

Taiyo Yuden LBC2518T3R3M Drum Core Wirewound Inductor

MPNLBC2518T3R3M
NRND

Taiyo Yuden LB, C Type Drum Core, Wirewound Inductor, LBC2518T3R3M, 3.3 µH, ±20%, 560 mA, 208 mOhm DCR, Unshielded, 1007 (2518 Metric), Surface Mount.

$0.1500Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LBC2518T3R3M specifications
ParameterValue
TypeDrum Core, Wirewound
SeriesLB, C Type
MountingSurface Mount
Current rating560 mA
Frequency - self resonant54MHz
Inductance frequency - test7.96 MHz
Operating temperature-40°C ~ 105°C
Material - coreFerrite
Size (Dimension)0.098\" L x 0.071\" W (2.50mm x 1.80mm)
Height - seated0.079\" (2.00mm)
PackageTape & Reel (TR) Cut Tape (CT)
ShieldingUnshielded
Tolerance±20%
Inductance3.3 µH
Case1007 (2518 Metric)
DC resistance208mOhm Max

Product details

Parametric profile and BOM-fit note

The LBC2518T3R3M is a drum-core, wirewound inductor in Taiyo Yuden's LB, C Type series, offering 3.3 µH inductance with ±20% tolerance. Rated for 560 mA continuous current with a maximum DC resistance of 208 mOhm — the DCR sets the I²R heating floor, so at full rated current the self-heating is about 65 mW, well within the 105°C operating ceiling. Unshielded construction means the magnetic field extends beyond the core; adjacent traces or components on the same 1007 (2518 Metric) footprint may couple noise if placed inside the fringing field. Self-resonant frequency is 54 MHz, tested at 7.96 MHz — above SRF the inductor behaves capacitively, so the usable bandwidth for filtering or DC-DC output ripple is well below 54 MHz.

Frequently asked questions

Where can I buy LBC2518T3R3M or check stock?

The LBC2518T3R3M is available to order through independent distribution.

What is the closest pin-compatible alternative to LBC2518T3R3M?

A functional replacement would need to match the 3.3 µH inductance, 560 mA current rating, 208 mOhm DCR, and 1007 (2518 Metric) footprint — confirm fit against the BOM position before substituting.