1.5 kW bidirectional transient suppressor
The 1.5KE9.1CA B0G: The single bidirectional channel replaces two unidirectional devices in antiparallel, saving board space and reducing part count on AC-coupled signal lines or power rails that see both positive and negative surges.
Clamp voltage and pulse current at 10/1000 µs
The 8.65 V minimum breakdown voltage gives a tight guard band — the device starts conducting well before the protected node sees damaging overvoltage. The 1500 W rating is derated linearly above 25°C; at 175°C the peak pulse capability drops to roughly 25% of the 25°C value, so thermal margin matters in high-ambient designs.
DO-201 axial package and through-hole mounting
Housed in the DO-201AA (DO-27) axial-lead package, the 1.5KE9.1CA B0G is a through-hole part suited for point-to-point wiring, terminal blocks, or PCB mounting with 0.040-inch diameter leads. The axial form factor allows it to be soldered directly into a board or wired as a free-hanging component in a panel harness. Supplied in bulk packaging, it is a practical choice for manual assembly or low-volume production runs where tape-and-reel feed is unnecessary.
Active production — sourcing posture
The part carries no known PCN activity; date codes are fresh production.