Skip to main content
STMicroelectronics Z0107NA 5AL2 — Discrete Semiconductors

STMicroelectronics Z0107NA 5AL2 TRIAC

MPNZ0107NA 5AL2
Active

STMicroelectronics Z0107NA 5AL2, Logic - Sensitive Gate TRIAC, Single, 800 V Off State, 1 A RMS On State, Through Hole, TO-226-3, TO-92-3 (TO-226AA), -40°C~125°C.

$0.3465Ref. price · indicative, final on quote
PackagingTO-226-3, TO-92-3 (TO-226AA)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

Z0107NA 5AL2 specifications
ParameterValue
Triac typeLogic - Sensitive Gate
MountingThrough Hole
Voltage - off state800 V
Voltage - gate trigger (Vgt)1.3 V
Current - hold (Ih)10 mA
Current - gate trigger (Igt)5 mA
Current - on state (It (RMS))1 A
Current - non rep. surge 50, 60Hz8A, 8.5A
Operating temperature-40°C~125°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
ConfigurationSingle
CaseTO-226-3, TO-92-3 (TO-226AA)

Product details

1 A sensitive-gate TRIAC for low-power AC switching

The STMicroelectronics Z0107NA 5AL2 is a logic-sensitive gate TRIAC rated for 800 V off-state voltage and 1 A RMS on-state current, housed in a through-hole TO-92 package. Its sensitive gate (5 mA max trigger current, 1.3 V max trigger voltage) allows direct drive from a microcontroller GPIO, a logic gate, or a low-power transistor without an intermediate driver stage — a common requirement in appliance control boards, solid-state relay inputs, and small motor or valve actuators.

Ratings that define the load and the drive

Gate trigger current of 5 mA max and trigger voltage of 1.3 V max confirm compatibility with 5 V logic families. The holding current of 10 mA max means the TRIAC will latch on once triggered and will drop out when the load current falls below that threshold.

The base product number is Z0107, which covers multiple trigger-current and package variants; the full order code Z0107NA 5AL2 specifies the TO-92 through-hole package with the 5 mA sensitive gate option.

Frequently asked questions

Is Z0107NA 5AL2 RoHS compliant?

Yes, it is ROHS3 compliant, meeting the latest EU restriction on hazardous substances.

What is the holding current for Z0107NA 5AL2?

The maximum holding current is 10 mA. This is the minimum load current required to keep the TRIAC latched on after the gate trigger is removed. For loads that draw less than 10 mA, the TRIAC may drop out at the next zero-cross, so verify that your load current exceeds this threshold.