Skip to main content
Log in
STMicroelectronics TSV854AIYPT — Analog & Data Acquisition

TSV854AIYPT STMicro Quad Op-Amp, 1.3 MHz, AEC-Q100, 14-TSSOP

MPNTSV854AIYPT
End of Life

STMicroelectronics TSV854AIYPT, Automotive AEC-Q100 quad general-purpose op-amp, 1.3 MHz gain bandwidth, 0.7 V/µs slew rate, rail-to-rail output, 130 µA per channel, 2.3 V to 5.5 V supply, -40°C to 125°C, 14-TSSOP.

$2.87Ref. price · indicative, final on quote
STMicroelectronics TSV854AIYPT datasheet (PDF)
Packaging14-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TSV854AIYPT specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset800 µV
Voltage - supply span5.5 V
Current - supply130µA (x4 Channels)
Current - input bias27 nA
Current - output (Channel)70 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product1.3 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate0.7V/µs
Case14-TSSOP (0.173\", 4.40mm Width)
Number of circuits4

Product details

Quad op-amp for automotive sensor conditioning

The STMicroelectronics TSV854AIYPT is a quad-channel general-purpose operational amplifier from the Automotive AEC-Q100 series, qualified for stress and reliability in vehicle environments. Each of the four amplifiers draws 130 µA of supply current, totalling 520 µA for the package. That quiescent budget makes this part a fit for always-on sensor interfaces in battery-backed ECUs or modules where the total current draw across multiple channels must stay under a few milliamps.

The 70 mA output current per channel can drive moderate loads such as ADC reference buffers or small relays directly.

ROHS3 compliant. No single-source risk here; the active lifecycle and multiple stocking channels support dual-sourcing strategies.

Frequently asked questions

Is TSV854AIYPT AEC-Q100 qualified?

Yes, the TSV854AIYPT is part of the Automotive AEC-Q100 series, qualified for stress and reliability in automotive applications.

What are the alternatives to TSV854AIYPT?

If a dual-channel op-amp fits the design, the TSV852IDT shares the same AEC-Q100 qualification, 1.3 MHz GBW, 0.7 V/µs slew rate, and rail-to-rail output in a smaller package. For a quad-channel alternative with slightly different parametrics, the TSV358AIDT offers a 1.4 MHz GBW and 0.6 V/µs slew rate but uses a different input stage with 70 nA bias current.

What is the slew rate of TSV854AIYPT?

The slew rate is 0.7 V/µs, which supports signal frequencies up to roughly 100 kHz at full output swing before distortion increases.