Skip to main content
Log in
STMicroelectronics TSB7192AIST — Analog & Data Acquisition

STMicroelectronics TSB7192AIST Op Amp, 22 MHz GBW, AEC-Q100

MPNTSB7192AIST
End of Life

STMicroelectronics TSB7192AIST, Automotive dual general-purpose op amp, 22 MHz GBW, 12 V/µs slew rate, rail-to-rail output, 2.7-36 V supply, -40°C to 125°C, 8-MiniSO package.

$2.62Ref. price · indicative, final on quote
STMicroelectronics TSB7192AIST datasheet (PDF)
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TSB7192AIST specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset650 µV
Voltage - supply span2.7 V
Current - supply1.8mA
Current - input bias300 nA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product22 MHz
GradeAutomotive
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate12V/µs
QualificationAEC-Q100
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

The 22 MHz GBW and 12 V/µs slew rate handle PWM feedback loops and high-frequency sensor outputs without significant phase lag. The 1.8 mA supply current per amplifier is moderate for most automotive ECUs. Each output can source or sink 50 mA.

The TSB7192AIST is supplied in an 8-MiniSO package (3.00 mm width, 0.118" pitch), surface-mount.

The TSB7192AIST is listed as an active product with ROHS3 compliance. For dual-sourcing resilience, the TS922IYPT is an AEC-Q100-qualified dual op amp with a similar supply range and rail-to-rail output, though its 4 MHz GBW and 1.3 V/µs slew rate are significantly slower.

Frequently asked questions

What are the key electrical specifications of TSB7192AIST such as GBW, slew rate, and input offset?

The TSB7192AIST has a 22 MHz gain-bandwidth product, 12 V/µs slew rate, 650 µV typical input offset voltage, 300 nA input bias current, and 1.8 mA supply current per amplifier. It operates from 2.7 V to 36 V and can output 50 mA per channel.

Can TSB7192AIST replace a failed op amp in my automotive circuit?

Yes, if the failed op amp is a dual, general-purpose, rail-to-rail output type in an 8-MiniSO package and operates within 2.7 V to 36 V. Check that your bandwidth and slew rate requirements are within 22 MHz and 12 V/µs, and that the input offset and bias current are acceptable for your signal levels.

What is the cross reference or replacement for TSB7192AIST?

The TS922IYPT is an AEC-Q100-qualified dual op amp from STMicroelectronics with a similar supply range and rail-to-rail output, but its 4 MHz GBW and 1.3 V/µs slew rate are much lower. Verify your bandwidth margin before substituting.