Skip to main content
Log in
STMicroelectronics TL082ACN — Analog & Data Acquisition

TL082ACN JFET Op-Amp, 16 V/µs Slew Rate, 4 MHz, 8-DIP

MPNTL082ACN
Obsolete

STMicroelectronics TL082ACN, dual JFET-input operational amplifier, 16 V/µs slew rate, 4 MHz gain bandwidth, 6–36 V supply, 8-DIP through-hole package, 0°C–70°C operating temperature.

$0.8800Ref. price · indicative, final on quote
STMicroelectronics TL082ACN datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL082ACN specifications
ParameterValue
SeriesAutomotive, AEC-Q100
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset3 mV
Voltage - supply span36 V
Current - supply1.4mA
Current - input bias20 pA
Current - output (Channel)40 mA
Operating temperature0°C~70°C
Gain bandwidth product4 MHz
PackageTube
Slew rate16V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

Dual JFET op-amp in 8-DIP — obsolete, last-time-buy window closed

The TL082ACN is a dual JFET-input operational amplifier from the TL082 family, offering a 16 V/µs slew rate and 4 MHz gain-bandwidth product. It operates from a 6 V to 36 V supply span and draws 1.4 mA quiescent current per amplifier.

The part carries an Automotive, AEC-Q100 series designation, but the 0°C–70°C commercial temperature range and through-hole DIP package are atypical for under-hood or chassis-mount automotive electronics.

Parametric profile — input bias, offset, output drive

Input bias current is 20 pA typical — the JFET front end keeps this low, suiting high-impedance sensor interfaces and sample-and-hold stages.

The last-time-buy window has closed, and no official successor is published. Date codes and lot traceability are verified before shipment.

Frequently asked questions

What is the replacement for TL082ACN?

No official replacement is published. For a pin-compatible dual JFET op-amp in 8-DIP, consider the TL082CP (commercial temp) or TL082ACN's own siblings if you find NOS. For a surface-mount alternative with automotive qualification, the TL082AID in SO-8 is a functional equivalent.

Is TL082ACN equivalent to TL082CP?

The TL082CP is the commercial-grade version (0°C–70°C) in the same 8-DIP package, with identical parametric specs (16 V/µs slew rate, 4 MHz GBW, 20 pA input bias). The TL082ACN carries an Automotive, AEC-Q100 series tag, but the CP does not. Electrically they are interchangeable in most circuits.

Can TL082ACN be used in automotive applications?

The part is listed under an Automotive, AEC-Q100 series, but its 0°C–70°C temperature range and through-hole DIP package limit it to cabin or non-under-hood use. For under-hood or extended-temperature environments, select a surface-mount variant with a -40°C–125°C rating.