Skip to main content
Log in
STMicroelectronics TL072ACN — Analog & Data Acquisition

TL072ACN dual JFET op-amp, 16 V/µs slew rate, obsolete

MPNTL072ACN
Obsolete

Texas Instruments TL072ACN, dual JFET-input operational amplifier, 4 MHz gain-bandwidth product, 16 V/µs slew rate, 1.4 mA supply per channel, 8-DIP through-hole package, 0°C to 70°C operating range.

STMicroelectronics TL072ACN datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TL072ACN specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset6 mV
Voltage - supply span36 V
Current - supply1.4mA
Current - input bias20 pA
Current - output (Channel)40 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product4 MHz
GradeAutomotive
PackageTube
Slew rate16V/µs
QualificationAEC-Q100
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

The TL072ACN is a dual JFET-input operational amplifier from TI's long-running TL072 family. Its 16 V/µs slew rate and 4 MHz gain-bandwidth product give it the large-signal bandwidth to handle audio-frequency signals and fast analog control loops without the input bias current penalty of a bipolar op-amp. Each amplifier draws 1.4 mA supply current, making this a low-power choice for multi-channel signal conditioning where a single 8-DIP package carries two independent JFET stages.

AEC-Q100 grade — automotive qualification on a commercial-temperature part

That combination suggests it was qualified for automotive infotainment or cabin electronics where the ambient stays within 70°C, not under-hood or engine-bay environments.

Frequently asked questions

What is the difference between TL072ACN and TL072BCN?

The TL072ACN and TL072BCN share the same 4 MHz GBW, 16 V/µs slew rate, and JFET input stage. The BCN suffix typically specifies a tighter input offset voltage grade — the ACN has a 6 mV maximum input offset voltage. Both are obsolete; the BCN variant may carry a different temperature grade or qualification tier.

What is the closest pin-compatible alternative to the TL072ACN?

Within the TL072 family, the TL072CP (commercial DIP-8) and TL072IP (industrial DIP-8) are pin-compatible JFET dual op-amps with the same 4 MHz GBW and 16 V/µs slew rate. Neither carries the AEC-Q100 qualification. For an automotive-grade alternative, the TL072AQDRQ1 (SOIC-8) is a qualified replacement but has a different footprint.