STMicroelectronics TL071 series, J-FET op-amp, TL071ACDT, single circuit, 4 MHz gain bandwidth, 16 V/µs slew rate, 1.4 mA supply, 8-SOIC package, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | J-FET |
| Voltage - input offset | 3 mV |
| Voltage - supply span | 36 V |
| Current - supply | 1.4mA |
| Current - input bias | 20 pA |
| Current - output (Channel) | 40 mA |
| Operating temperature | 0°C ~ 70°C |
| Gain bandwidth product | 4 MHz |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Slew rate | 16V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
The TL071ACDT: Operates from a single or split supply spanning 6 V to 36 V total.
Supply current is 1.4 mA typical — a reasonable trade-off between bandwidth and battery life for portable instrumentation.
The SOIC-8 footprint is a standard layout; the tape-and-reel variant (TL071ACDT) suits automated pick-and-place assembly.
TL071ACDT is a single op-amp; TL072ACDT contains two independent amplifiers in the same package. All other key ratings — 4 MHz GBW, 16 V/µs slew rate, J-FET input — are identical.
No — the minimum supply span is 6 V. A single 5 V rail is below the operating floor. Use a 9 V battery or a ±3 V split supply instead.