Skip to main content
Log in
STMicroelectronics STW69N65M5

STW69N65M5 MOSFET N-Ch 650V 58A TO-247-3, 45 mOhm Rds(on)

MPNSTW69N65M5
End of Life

STMicroelectronics MDmesh™ V series, N-Channel MOSFET, 650 V Vdss, 58 A continuous drain, 45 mOhm Rds(on) max at 29 A, 10 V, TO-247-3 through-hole package, 150°C junction temperature.

$12.09Ref. price · indicative, final on quote
STMicroelectronics STW69N65M5 datasheet (PDF)
PackagingTO-247-3
RoHSROHS3 Compliant
SeriesMDmesh™ V
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STW69N65M5 specifications
ParameterValue
SeriesMDmesh™ V
FET typeN-Channel
MountingThrough Hole
Drain to source voltage650 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C58A (Tc)
Power dissipation330W (Tc)
Operating temperature150°C (TJ)
PackageTube
Vgs±25V
TechnologyMOSFET (Metal Oxide)
CaseTO-247-3
Vgs(th) (Max) @ id5V @ 250µA
Rds on (Max) @ id, vgs45mOhm @ 29A, 10V
Gate charge (Qg) (Max) @ vgs143 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds6420 pF @ 100 V

Product details

Rds(on), gate charge, and the switching budget

The STW69N65M5: Gate charge totals 143 nC at 10 V. Input capacitance Ciss is 6420 pF at 100 V drain bias. Input capacitance Ciss is 6420 pF typical at 100 V drain bias — this dominates the turn-on delay and the driver's peak current requirement.

Active lifecycle, ROHS3, and sourcing posture

The through-hole TO-247-3 package is a standard power footprint, widely second-sourced across the industry, though no official cross-reference is listed in this record.

Frequently asked questions

Is STW69N65M5 RoHS compliant?

Yes, it is ROHS3 Compliant, meeting the latest EU restriction-of-hazardous-substances directive without exemptions.

Can I replace STW69N65M5 with STW70N65M5?

The STW70N65M5 is a higher-current variant in the same MDmesh V family and TO-247 package, but it is not listed as a direct pin-compatible replacement in this record. Compare the Rds(on) and gate charge specs from the respective datasheets to confirm the thermal and drive margin in your design before substituting.